Consent

This site uses third party services that need your consent.

Media

Place IMAG cameras

An IMAG camera films the stage in the rig and sends its picture to the screens of its channel.

Adding a camera

Save current view as camera turns your view into a camera. It is the camera button on the Media workspace's tool shelf; the camera takes your position, direction and framing.

+ Camera adds a camera to a camera channel in the Player. A scene holds up to 16 cameras.

Aiming it

Properties set position, rotation and focal length. Focal length is in millimetres, 35 mm equivalent: around 24 mm for a wide shot of the stage, 100 mm and more for a close-up from front of house.

An IMAG camera in Properties

Look through shows the camera's picture full size, in a 16:9 frame. Turning it off brings back the view you had.

Looking through Camera 1

Update from current view moves the camera to your view. Frame the shot by moving your own camera, then press it.

Cutting between cameras

Cut to camera puts a camera on the channel's screens. The cut is session state like playback: colleagues and the presenter's guests see it, and it is not saved.

Two cameras on a camera channel

Camera pictures need Live

Camera pictures exist only in Live. In Plan, screens on a camera channel show the test card.

The cards show small previews. They are taken when you switch to Live and do not follow later changes to the rig or the lighting.

Hiding camera symbols

Camera symbols can be hidden in the viewport. Hide camera symbols in the viewport toolbar takes the camera bodies out of the view; guests start without them.

  • 03 An IMAG camera films the stage in the rig and sends its picture to the screens of its channel.