Consent

This site uses third party services that need your consent.

Stage and scenery

Build a ramp

A ramp is a generated shape. You set it by its measurements, and FlexViz draws it in Plan and Live.

Adding a ramp

Ramp in Primitives adds a straight ramp, 4 m long and 2 m wide, rising from the floor to 0.5 m. Select it and Properties shows its measurements.

A curved ramp in Properties

Straight or curved

Path bends the ramp left or right: straight, arc-left or arc-right.

The radius sets the curve. Radius is measured to the centre line of the ramp; a small radius makes a tight bend, a large one a gentle sweep.

The curved ramp up to the stage, from above in Plan

Length, width and height

Start and end height make the slope. Start height is where the ramp begins, End height where it meets the stage; the same value at both ends makes a level walkway.

Thickness sets the deck. Thickness is the ramp's own depth below its surface.

The limits

Every parameter has a range, and FlexViz refuses a value outside it:

Length
0.1–100 m
Width
0.1–20 m
Radius
0–100 m
Start height, End height
0–20 m
Thickness
0–2 m
  • 02 A ramp is a generated shape. You set it by its measurements, and FlexViz draws it in Plan and Live.